Frankenstein Quotes Sympathy For Victor

fireworks: build a simple smoke

CAUTION: non mi accollo responsabilità per danni a cose o persone derivate dall'uso di questa guida. Provare questa autocostruzioni solo se si è esperti della materia e all'aperto.

CARATTERISTICHE DEL FUMOGENO OTTENUTO

1) Non prende fuoco durante la preparazione neanche se dimenticato sul fuoco.

2) Non fa fumo durante la preparazione (quindi potete farlo tranquillamente nella cucina di casa.

3) La fiamma è limitata, quindi non particolarmente incendiario.

4) Rimane caldo più a lungo prima di solidificarsi, quindi facilmente malleabile.

5) Non rovina il materiale in cui viene preparato; pentole cucchiai ecc…(infatti basta mettere tutto a mollo in acqua e tutto viene via in 10 min).

6) La reazione è più lenta quindi il fumogeno dura molto di più.

7) Con il sistema di innesco che facilita l’accensione, può essere lanciato senza che questi si spenga.

8) Si conserva anche se non è sigillato.

9) Un fumogeno già costruito può sempre essere smontato, riscaldato e rimodellato.

CONTENITORI

Materiali: cartoncino dim. A4, giornale, carta adesiva, un pennarello grosso (non quanto un uniposca) o un tubo.

Costruzione: Tagliare a metà dalla parte più small cardboard, thus obtaining two strips of cardboard. Take a strip and arrotoliamola the marker so as to obtain a cylinder. With the adhesive paper stop now both ends of the cylinder so that you do not unroll. Remove the pen. Do with the newspaper into balls of paper, and inseriamole in one end.

Now we block the ball with a bit of ribbon.

MIXTURE OF SMOKE

Materials:

sugar, potassium nitrate (saltpeter), honey (the cheapest you can find), 3 containers per roll machine photo

pan, spoon.

NB: potassium nitrate can be found in any agricultural consortium in convenient bags of 25 or 50 kg.

(the bag of 25 costs about 12 €, the 50 double-J), or even drugs in bags of 1 kg but it costs much more.

Procedure:

fill 2 of the roller door with saltpeter.

The third loads it with sugar.

So for part two of sugar saltpeter.

Take a tablespoon of honey and now let's put in our pot (even a pot or pan should be fine).

add sugar ... ..

and spend in the kitchen. We turn on the stove and adjust the heat to low.

melted the honey with sugar, occurs when all the liquid, gradually add the saltpeter, and turn around with a spoon.

After adding the second quantity of saltpetre, we continue to turn, and turn off the stove if necessary so as not to burn the mixture (make sure the dough does not come out of the pot during the preparation. ... In contact with the flame alive triggers). Take one of our containers and coliamo with a spoon the mixture into the container. Fill the container

leaving about an inch gap at the top, we will need to enter the trigger.

IGNITION AND IGNITION

Materials: scissors, paper, spoon.

Method: cut strips of paper about 3 cm wide and spalmiamoci smoke on the dough is still warm with a spoon.

proceed then the strip of paper rolled up on itself, getting a spiral cylinder with a diameter of about 1.5 cm.

Separiamola from the rest of the strip and cut into 3 parts, obtaining the cylinders of about 1 cm in height. (Percussion).

We put triggers in the vacated Container smoke.

The smoke is ignited with a flame and must be launched immediately.

How Do You Chage Yourself In Poptropica

Punta Nordend Monte Rosa Hutte

date tour: April 18, 2010
Starting Price: 2883 m ( Monte Rosa Hutte )
share of Arrival: 4609 m
total elevation gain: 2300 + m/-3000 m.
difficulty AD/S4
fellow tour: Luca, Umberto, Martino, Chiara, Guido, Astrid, Franco, Matthew, Cynthia, Richard, Francis, Fabio
camptocamp

Flickr Photos

Nerf Gun Birthday Invitation

Edit Samsung ML -1640 for use indefinitely toner series


laser printer Samsung ML-1640 monochrome is one of the most popular and economical on the market. Samsung, however, adopt a dual system of control of the toner to avoid use of compatible or make you recharge your toner test that comes standard with the printer.

This change will allow you to recharge an indefinite number of times the test toner or printer using the printer toner ML-1610, much cheaper.

Remove the rear panel of the printer, just remove a few screws. Put bare the motherboard of the printer and locate the EEPROM as photography.

The chip on which to file with the bridge is slightly larger than half a centimeter wide and the feet are a little less than a millimeter. Hold the hand and the cable while using a soldering iron stylus low power (15-20W) and connect pins 1-4 of the EEPROM, also as photos. In this way, the automatic counter of pages, which would prevent you from using the same toner test for more than 750 pages, is short-circuited and reset each time the printer is turned on.

From now on the Samsung ML-1640 will call any type of toner used and reused (including those for the ML-1610) without objection. You open the toner, takes off his cap, pour la ricarica e si rimonta. Ogni volta che la stampante si accende, va in corto il chip che conta le pagine stampate e si resetta tornando a 0.

Per usare i toner della stampante ML-1610 è sufficiente togliere il fusibile che si trova ai lati del toner con un piccolo cacciavite usato come leva e mettere il cilindretto metallico che si trova sul toner di prova della ML-1640.