date tour: August 18, 2010
share of Departure: 2405 m arrival Rosetta cable
share arrival 2855 m
difference : + 450 m.
difficulty TD-, steps of 5 °
fellow tour: Marc Canter, Luca Colombo, Chiara Passoni.
camptocamp
Wednesday, August 18, 2010
Watch Jesse Jane Streaming
Cima Immink: street-Solleder Fontein
date tour: August 18, 2010
share of Departure: 2405 m arrival Rosetta cable
share arrival 2855 m
difference : + 450 m.
difficulty TD-, steps of 5 °
fellow tour: Marc Canter, Luca Colombo, Chiara Passoni.
camptocamp
date tour: August 18, 2010
share of Departure: 2405 m arrival Rosetta cable
share arrival 2855 m
difference : + 450 m.
difficulty TD-, steps of 5 °
fellow tour: Marc Canter, Luca Colombo, Chiara Passoni.
camptocamp
Sunday, August 8, 2010
Pala Casino Jobs Pechanga Casino Or Pala Casino?
Aiguille Croux: the south-west
date tour: August 8, 2010
share of Departure: 2590 m refuge Monzino
share arrival 3256 m
difference : + 660 m.
difficulty TD +, steps of 5 / 4
fellow tour: Luca Colombo , Chiara Passoni, Dad and Uncle Passoni Passoni
camptocamp
date tour: August 8, 2010 share of Departure: 2590 m refuge Monzino
share arrival 3256 m
difference : + 660 m.
difficulty TD +, steps of 5 / 4
fellow tour: Luca Colombo , Chiara Passoni, Dad and Uncle Passoni Passoni
camptocamp
Friday, July 16, 2010
How To Pick A Master Lock At School
Building a cable SCART - SVHS
Materials Required: A
SCART with all the pins, taking a four-pin MINI DIN MALE placed as the diagram below, two female RCA jacks (preferably gold), four-wire cable plus the mass for SVHS (in a single strand) of cable with two conductors and two masses for the audio (in two separate wires, each with a mass and a cable to the signal).
how:
Solder the two wires (SVHS and audio) to the scart pins according to the diagram below, of course a note of the thread color and number of the corresponding pin and then solder to the right of the pin mini din plug the SVHS and two RCA audio. The mass that surrounds the SVHS cable soldered to the metal housing of the scart, or make sure it is good contact between the casing and inserting the plastic, this is very important because doing so will protect the carcass SVHS signals from external interference, the Board also did not longer than three or four meters at the maximum not to weaken the segnle SVHS, audio, there is no problem because the sound card taken from (the output that goes to the speakers) which is amplified (about two watts) of course you use the external masses which enclose the audio cable to the audio ground.
To make good welds I suggest you tin the wires before soldering to the pins of the sockets, and use of cavi di qualità . 
Materials Required: A
SCART with all the pins, taking a four-pin MINI DIN MALE placed as the diagram below, two female RCA jacks (preferably gold), four-wire cable plus the mass for SVHS (in a single strand) of cable with two conductors and two masses for the audio (in two separate wires, each with a mass and a cable to the signal).
how:
Solder the two wires (SVHS and audio) to the scart pins according to the diagram below, of course a note of the thread color and number of the corresponding pin and then solder to the right of the pin mini din plug the SVHS and two RCA audio. The mass that surrounds the SVHS cable soldered to the metal housing of the scart, or make sure it is good contact between the casing and inserting the plastic, this is very important because doing so will protect the carcass SVHS signals from external interference, the Board also did not longer than three or four meters at the maximum not to weaken the segnle SVHS, audio, there is no problem because the sound card taken from (the output that goes to the speakers) which is amplified (about two watts) of course you use the external masses which enclose the audio cable to the audio ground.
To make good welds I suggest you tin the wires before soldering to the pins of the sockets, and use of cavi di qualità .
Subscribe to:
Posts (Atom)